10W high power output
Order Handling Time within 3 Working days(Pre-sale products excluded).
7198 PEOPLE ARE LOOKING FOR THIS PRODUCT
- Frequency matching function
- 10W high power output
- CH 99
- High /Low power switch
- CTCSS/DCS(QT/DOT code)
- Short cut operation
- Wide/Narrow band
- Monitor /Monitor momentary function
- Scan function
- VOX function
- Emergency alarm
- Time-out-timer(TOT)
- Busy channel lockout(BCL)
- End-tone elimination
- Battery save
- Low-battery alert
- PTT ID
Review this product
Share your thoughts with other customers
John
works as described. Happy with my purchase
David Wemmie Jr.
We use these for church security. They work ok most of the time. I wish there was a way to program them to beep when the PTT is keyed. Having issues training the guys to pause before talking plus we have occasional issues of accidental keying for long periods of time
COMCAM
The RT-26 radio I received had good power and signal strength/range but the audio transmitted had very "low volume." There was no improvement when using an external microphone, so it was obviously an internal issue. Customer service contacted me right away and quickly replaced my defective RT-26 with a similar spec Retevis RT-1. The replacement RT-1 radio I received is loud and clear TX/RX and I am very happy with it. Thank you Retevis Direct!!!
Jimmy
Software is easy and it works well. So far so good
|
General |
|
|
Model |
RT26 |
|
Frequency range |
400-470MHz |
|
Channel number |
99CH |
|
Channel spacing |
25KHz\12.5KHz |
|
Battery capacity |
3000mA |
|
Operating temperature range |
-10℃~+50℃ |
|
The antenna impedance |
50Ω |
|
Rated Voltage |
7.4V |
|
Transmitter |
|
|
Rf power |
High:10W/Low:5W |
|
Modulation |
F3E |
|
Audio distortion |
≤5% |
|
Maximum deviation |
≤5KHz |
|
RECEIVER |
|
|
Sensitivity |
≤0.25uV |
|
Rated Audio |
400mW |
|
Rated Audio Distortion |
≤5% |
- Frequency matching function
- 10W high power output
- CH 99
- High /Low power switch
- CTCSS/DCS(QT/DOT code)
- Short cut operation
- Wide/Narrow band
- Monitor /Monitor momentary function
- Scan function
- VOX function
- Emergency alarm
- Time-out-timer(TOT)
- Busy channel lockout(BCL)
- End-tone elimination
- Battery save
- Low-battery alert
- PTT ID